Sekoahelo sa Jig sa ho Welda se Iketsang, Likarolo tsa Sekoahelo se ka Pele sa 630kg
Video
| Motšehetsi oa Motheo: | Tšepe | Lisebelisoa tsa Motheo: | Al |
| Boholo: | 1130*980*1030 Limilimithara | Boima: | 630KG |
| Nako ea Sebaka: | ± 0.05mm | Software: | Catia, UG, CAD, STP |
Sekoahelo se ka Pele sa Likoloi tse Ikhethileng tsa ho Welding Jig Fixture
Di-Datum Pins di tla ba di-taper pins tse kentsweng ka selemo moo ho kgonehang, moenjiniere ya amehang o hloka ho botswa haeba moqapi a ikemiseditse ho ba le mofuta o mong. Di-datum pins tsohle tse nang le di-tape di lokela ho hlahloba ho shear moo ho kgonehang, di be le sekhutlo pakeng tsa 5-10º mme di netefatse hore karolo e fumaneha le ho tiiswa hantle.
Li-locator tsena li lokela ho ba le ketso e ntle ea ho thellisa ntle le ho bapala ka lehlakoreng. Matla a selemo a lokela ho ba a loketseng ho fana ka sebaka se setle se setle. Pele ho ho tlama, li-locator tsa taper li lokela ho tšoara karolo e le 'ngoe 'me karolo e lokela ho tšoaroa 2mm ho isa ho 5 mm ka holim'a bokaholimo ba datum.
Likarolo tsohle (masoba, li-slots, li-dimples tse ntšitsoeng jj) tse nang le mamello ea boholo bo boletsoeng setšoantšong li tlameha ho ba le li-pin tsa Go/NoGo. Li-pin tsa Go/NoGo li tlameha ho ba "Progressive" tse hataketsoeng "Go" ebe "Go/NoGo" ka lehlakoreng le le leng la phini. Li-pin tsa li-slots (li-slots tsa mofuta o chitja kapa o sekoere) li tlameha ho arohana bakeng sa bophara le bolelele.
Li-Go/No Go Pin tsohle li lokela ho beoa ka har'a li-holder tse loketseng 'me li lokela ho kenngoa motheong (ntle le likarolo tse kang Li-Dimples tse ntšitsoeng moo ho leng thata ho li bona hantle ha li kentsoe motheong) 'me li beoa holim'a moeli oa motheo. Moralo o tla lumella ho tlosoa ha phini haeba ho hlokahala ho e lokisa kapa ho e nkela sebaka.
Mong'a e mong le e mong o lokela ho ba le 'lengolo' la ho itsibisa; Eurospec e tla hlwaya boholo litaelong tsa bona tsa Fixture.
Lintlha tsa rona tsa tlhahiso
| Lintho | ||
| 1 | Thepa ea Motheo | Al |
| 2 | Kopo | Likarolo tsa ho hatakela |
| 3 | Kalafo ea holim'a metsi | Ho ntša oksijene/Pente |
| 4 | Ho Sebetsa ka ho Sebetsa | 0.15 |
| 5 | Ho nepahala ha Liprofaele tse Ling | 0.1 |
| 6 | Ho nepahala ha Datum Hole | ± 0.05 |
| 7 | Setifikeiti | ISO 9001:2008 |
| 8 | Setifikeiti sa CMM | E |
| 9 | Software | Catia, UG, CAD, STP |
| 10 | Tlhaloso | 630KG |
| 11 | Ho paka | Lebokose la Lehong |
Thepa
Poleiti ea Motheo: Aluminium
Foreimi e ka Sehloohong ea Motheo: Tšepe
Likarolo: Aluminium le Tšepe tse nang le kalafo ea mocheso
'Mala
Bokaholimo ba Poleiti ea Motheo: E phekoloa ka oli e thibelang mafome.
Foreimi e ka Sehloohong ea Motheo le Litšehetso: 'Mala o Motala
Likarolo tsa Tšepe le Aluminium: Anodized e Ntšo
Mamello ea tlhahiso
1. Sebaka sa Datum ± 0.05mm
2. Bokaholimo ± 0.15mm
3.Li-checking Pins le Masoba ± 0.1mm
Tshebetso
Ho Sila ka CNC (Ho Sila/Ho Reteleha), Ho Sila
Kalafo e Ntšo e Hloekileng
Lihora tsa Moralo (lihora): 60h
Taolo ea Boleng
CMM (Mochini oa ho Lekanya oa 3D Coordinate), HR-150 A Hardness Tester
Nako ea ho etella pele le ho paka
Likhoeli tse 2 kamora hore moralo oa 3D o amoheloe
Matsatsi a 15 ka sekepe: HMM
Nyeoe e Tloaelehileng ea Lehong e Romelloang Kantle
Leano la Boleng
Ho Latela Melao ea Molao
Moreki Pele
Taolo ea Boleng ka Kakaretso
Ts'ebetso ea Sistimi
Ntlafatso e Tsoelang Pele
Hape
Re inehetse ho fa bareki ba rona litharollo tsa boleng bo holimo, tse sebetsang le tse theko e tlaase tse sebeletsang litlhoko tse fapaneng libakeng tsa ho hlahloba lisebelisoa, lisebelisoa tsa ho tjheseletsa le li-jig! Re tla sebetsa haufi-ufi le bareki ho hlalosa litlhoko tsa bona le ho lekola lintlha tsa bohlokoa tsa moralo tse kang ts'ebetso, litlhoko tsa tlhahiso.
.png)
.png)